Narrow Gauge North

2027

A 00n3 layout by Dr Alan Gee
Scale 00n3

Size 13’ x 2’

new
Schull is a fishing port on the Mizen peninsula in County Cork, Southern Ireland approximately 15 miles from the town of Skibereen.  In 1886 a 3' gauge roadside tramway was constructed to join Schull to Skibereen.  The original undertaking had the grand title of the West Carberry Tramways and Light Railway Company.  This however was changed in 1892 to the more familiar Schull and Skibereen Railway.

In 1924 after the partition of Ireland, all the railways in Southern Ireland were amalgamated into the Great Southern Railway, and the Schull and Skibereen Railway carried on under this new management until closure came about in 1947, mainly due to competition from road traffic, and coal shortages.

The model is a near exact model of Schull station situated as it was on the foreshore of Roaring Water Bay at Schull.  The layout has been built to a scale of 4mm to the foot, resulting in the 3' narrow gauge track being 12mm wide on the model.  All the buildings have been constructed from measurements taken on site, and the track plan is exactly as it was at Schull.  A novel feature is that the run round loop and the engine shed were off a turntable.  The breakwater was constructed to stop the station yard flooding at high tide.

There are no ready to run or complete kits available for the rolling stock used on the railway, and all the stock you see displayed has had to be scratch built from etched brass and nickel silver sheets.  Drawings if the rolling stock can  be found in James Boyd's book on the Schull and Skibereen railway, which was the main source of information for the model.  All the track was hand made from copper clad sleepers and code 75 flat bottom rail, to give the exact sleeper patterns as found on the real railway.

Modified Faller road vehicles have also been incorporated into the layout to illustrate the original roadside tramway feature of the railway.

The operators will be pleased to answer any questions you have about Schull and Irish narrow gauge railways in general.

A HOm layout by Furness Model Railway Club
Scale HOm (4mm/1ft)
Gauge 12mm
Size 6’ x 7’

Set somewhere on the Swiss Furka Oberalp Bahn, between Andermatt and Disentis, the layout features working rack and pinion operation allowing the train to climb approximately 3 feet as they wind their way around the layout, with up and down passenger trains passing each other at the small station, which is served by a funicular railway.

Following on from our late club layout "Oberfriedhof" the baseboards have been built at an angle of 45 degrees.  It is also a test bed for an operating system which has at its heart a programmable logic chip.  Developed by members of the Furness Model Railway Club, it allows a sequence of trains to be run automatically.

Further information can be found on the website.

 

 

A 009 layout by Darren Hedges
Scale 009 (4mm/1ft)
Gauge 9mm
Size 5’ x 1’

Draig Goch is one end of a fictional 2 foot gauge railway somewhere in North Wales.  The general idea is that in the late 1880's local quarry owners got together to build a railway from the coast up the valley serving several slate and granite quarries along its route, with a couple of copper and lead mines.  Narrow gauge was chosen to reduce the cost, and it was decided from the outset, that a passenger service would be provided for the local population.

The railway and the quarries it served were moderately successful until the late 1940's when the area fell on hard times.  With the steady closure of the quarries that it served the railway found it harder and harder to make ends meet.  With the line facing total closure in 1955, a group of enthusiasts from the North West and Yorkshire, inspired by the unexpected success down at the Tallylyn Railway, formed a preservation society, with the aim of keeping the railway open.

 

Since the group took over the line has gone from strength to strength, increased traffic levels requiring the sourcing of stock from other lines.

 

The layout consists of a terminus station with single platform, and run round loop, a siding serving a goods shed, and 2 sidings serving the coal yard.  A three road sector plate is provided for the fiddle yard.

 

Track work is by PECO, and the points are operated by Tortoise slow action point motors.  Buildings are from the WILLS range, painted in the house colours of cream with brown doors and windows.  Most items of rolling stock are hand built from kits, together with a few ready to run items.

 

The layout is owned and operated by a member of the South Yorkshire group of the OO9 Society.

Final Appearance!

A 0n30 layout by Paul Prentice


Size 21’ x 1’6"

 

 

 

Set in late 1940's in Northern California is is a 3 foot gauge line, with a logging branch line.

Operation is simple, with a small passenger train to the Depot, and a freight service to serve the small freight house.

 

Logging and mining trains are also run.