A Festiniog/NWNGR layout by Paul Holmes
4mm/ft finescale
Gauge 7.83mm
In 1865 the Croesor Tramway obtained an Act of Parliament permitting the construction of an extension of their line around the coast from the quays at Portmadoc to the village of Borth-y-Gest , and to run steam locomotives on their 2 foot line.
The line was never constructed, but my model is yet another 'might have been'. I assume that the line came around the headland and behind the fictional Gorseddau slate warehouse to emerge onto a newly built wharf that had been constructed parallel to the Glaslyn river's course through the estuary, thus creating an enclosed harbour at Borth-y-Gest.
On the same date 10 years later the NWNGR obtained its Act - if built in full, this would have created a network of two foot lines around North Wales , and would have enveloped the Croesor, creating the line we know now as the Welsh Highland, some 50 years earlier than actually happened.
Track is all hand built to 7.83mm gauge using copper clad sleepers and PECO Z gauge rail. Stock is a mixture of scratchbuilt and kitbuilt items, running on 2mm Association wheels set to 6.9mm back-to-back. The layout runs with DCC control by Lenz, decoders by Lenz and also now with Umelec and Dietz sound decoders - LISTEN to the England engines at work on the wharf..and see the world's first (I think) Double Fairlie ( James Spooner) in 4mm scale with DCC lights, sound and smoke .
https://www.narrowgaugenorth.org.uk/index.php/85-public-news/exhibitors-previous?start=88#sigProId06bdccaf4b
A 1:48 scale layout by Peter Kazer
Scale 1/4in to 1ft
The model represents the principal station of the Corris Railway as it was circa 1890. The railway itself ran from Machynlleth in Mid-Wales up the Dulas Valley to Corris where the line split with a horse worked branch running to the slate quarries of Upper Corris. The main line continued up the valley to reach a terminus at Aberllefenni , where a further horse worked tramway continued to serve the Ratgoed quarry system.
Initially opened in 1859 as a slate only service operated by the quarry owners using horse power the railway was converted to steam traction in 1879 and an official passenger service introduced in 1883. The legacy of horse traction is still present in the tram car style coaches and overall size of the stock. The coming of steam provoked an improvement as witnessed by the recent introduction of bogie coaches constructed from two of the earlier four wheel coaches on a new underframe.
The station is unique in narrow gauge railways in having an overall roof and the Site itself presents a compact self contained vista almost without equal on the narrow gauge railways of the U.K.
Having decided upon the prototype and the scale it follows that everything [with the exception of the figures] would have to be scratch built. Construction was not started until a full Site survey had been carried out and a photographic record built up of existing features and where those are missing historical photographs. Some of these are on display to the left-hand end of the layout.
Many modelling techniques have been used and evolved in order to complete the model so if you have any questions please ask. I will try to answer them!!!
Photographs reproduced with the kind permission Steve Flint and Peco Publications
https://www.narrowgaugenorth.org.uk/index.php/85-public-news/exhibitors-previous?start=88#sigProIde213befbd4
A 009 layout by Peter Leadley (Hull Miniature Railway Society)
Scale: 4mm / ft.
Gauge: 9mm (‘009’)
Based during a hot summer in the early part of the 21st Century, the layout represents a narrow gauge tourist attraction that has been built by volunteers mainly on the old track bed of a now defunct standard gauge branch line somewhere in England. The area modelled is a through station where the trains can pass as the line is supposedly single throughout its length apart from some passing loops and at stations. There is a small engine shed/workshop located in the station area so locomotives and stock can be changed if required. The line runs alongside a river at this point so there is activity as the tourist not only sample the delights of the railway, but also the leisure facilities that are associated with the river side. The leisure interests are further enhanced with the riding school located nearby.
Please feel free to ask any questions about the layout or 009 modelling in general, whoever is operating will do their best to provide you with an answer.
Photographs reproduced with the kind permission of Peco Publications
-
Cressington
Cressington
-
Cressington
Cressington
-
Cressington
Cressington
-
Cressington
Cressington
-
Cressington
Cressington
-
Cressington
Cressington
-
Cressington
Cressington
-
Cressington
Cressington
-
Cressington
Cressington
https://www.narrowgaugenorth.org.uk/index.php/85-public-news/exhibitors-previous?start=88#sigProId417f008979
An 0.16.5 scale layout by Bill Ferguson
Size 12' x 12'
It features a working waterwheel (no water!), a small converted 009 turntable and a quayside.
The picture of the loco coming out of the quarry has a building in the background will be featured in the 7mm Association "How to" Series about making buildings.
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
https://www.narrowgaugenorth.org.uk/index.php/85-public-news/exhibitors-previous?start=88#sigProIdd361944d1b