Narrow Gauge North 2007
009 PUBLICITY STAND
7 1/4" GAUGE SOCIETY
‘Cackler ‘ was built by its owner Chris Farrar and completed in 2000. It is a model of the Hunslet built locomotive no 671 of 1898. It was supplied to work on the tramway line at Dinorwic Quarry The model represents how the locomotive would have appeared in the 1930's with fully riveted tank, sanders and many other original features.
www.sevenandaquarter.org
ABBEY LIGHT RAILWAY
Abbey Light Railway will be displaying a Baguley 10 HP 760 outside the main entrance to the show.
BLACKHAWK HOUSE
An On30 layout by Ian Drummond
Scale 7mm/1ft
Gauge 16.5mm
Size 10' x 6'
Blackhawk House was the Engine House (American term for engine shed) of the Gilpin Gold Tram, which served many of the mines of Gilpin County in Colorado , USA . This 2ft gauge line was constructed in several phases staring in 1887, and eventually the line was some twenty six miles long. It twisted and climbed all over Gilpin County with steep gradients, in places at least 1 in 20, and sharp curves, the tightest of which was reputed to have been 50ft radius on the main line. Sadly thought the line was relatively short lived, closing in 1917. The story of the line was related in the March/April 2006 edition of the magazine "Narrow Gauge World".
The model supposes that in fact the line survived longer, being purchased by a large mining company, which brought in some additional motive power to supplement the line's original Shay geared locomotives. At the centre of the layout is Blackhawk House which was in fact a converted barn, and serves as the main engineering facility on the line. The main line climbs and curves round the Engine House on a series of wooden trestles. These were so close to the Engine House that when the line acquired larger locomotives, part of the roof of the barn had to be cut away to allow the engines to pass. To the front of the layout there is a line leading away to the warming house. In winter trains of gold ore were placed in the warming house overnight, in order to thaw out, the low temperatures often completely freezing the ore inside the hopper wagons. The line now operates a range of locomotives including Shays and Climax's, as well as a couple of early railtrucks. Operation of the layout is by a DCC system which allows for individual sound for each locomotive.
Currently the layout is still very much a work in progress, and is exhibited to demonstrate some of the variety of modelling techniques used, many of which are following American practice.
7 1/4" GAUGE SOCIETY
‘Cackler ‘ was built by its owner Chris Farrar and completed in 2000. It is a model of the Hunslet built locomotive no 671 of 1898. It was supplied to work on the tramway line at Dinorwic Quarry The model represents how the locomotive would have appeared in the 1930's with fully riveted tank, sanders and many other original features.
www.sevenandaquarter.org
ABBEY LIGHT RAILWAY
Abbey Light Railway will be displaying a Baguley 10 HP 760 outside the main entrance to the show.
-
Abbey Light Railway
Abbey Light Railway
-
Abbey Light Railway
Abbey Light Railway
-
Abbey Light Railway
Abbey Light Railway
-
Abbey Light Railway
Abbey Light Railway
-
Abbey Light Railway
Abbey Light Railway
View the embedded image gallery online at:
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProId6bb394b65a
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProId6bb394b65a
BLACKHAWK HOUSE
An On30 layout by Ian Drummond
Scale 7mm/1ft
Gauge 16.5mm
Size 10' x 6'
Blackhawk House was the Engine House (American term for engine shed) of the Gilpin Gold Tram, which served many of the mines of Gilpin County in Colorado , USA . This 2ft gauge line was constructed in several phases staring in 1887, and eventually the line was some twenty six miles long. It twisted and climbed all over Gilpin County with steep gradients, in places at least 1 in 20, and sharp curves, the tightest of which was reputed to have been 50ft radius on the main line. Sadly thought the line was relatively short lived, closing in 1917. The story of the line was related in the March/April 2006 edition of the magazine "Narrow Gauge World".
The model supposes that in fact the line survived longer, being purchased by a large mining company, which brought in some additional motive power to supplement the line's original Shay geared locomotives. At the centre of the layout is Blackhawk House which was in fact a converted barn, and serves as the main engineering facility on the line. The main line climbs and curves round the Engine House on a series of wooden trestles. These were so close to the Engine House that when the line acquired larger locomotives, part of the roof of the barn had to be cut away to allow the engines to pass. To the front of the layout there is a line leading away to the warming house. In winter trains of gold ore were placed in the warming house overnight, in order to thaw out, the low temperatures often completely freezing the ore inside the hopper wagons. The line now operates a range of locomotives including Shays and Climax's, as well as a couple of early railtrucks. Operation of the layout is by a DCC system which allows for individual sound for each locomotive.
Currently the layout is still very much a work in progress, and is exhibited to demonstrate some of the variety of modelling techniques used, many of which are following American practice.
View the embedded image gallery online at:
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProIdc131933e26
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProIdc131933e26
BORTH -Y-GEST
A Festiniog/NWNGR layout by Paul Holmes
Gauge 7.83mm
In 1865 the Croesor Tramway obtained an Act of Parliament permitting the construction of an extension of their line around the coast from the quays at Portmadoc to the village of Borth-y-Gest , and to run steam locomotives on their 2 foot line.
The line was never constructed, but my model is yet another 'might have been'. I assume that the line came around the headland and behind the fictional Gorseddau slate warehouse to emerge onto a newly built wharf that had been constructed parallel to the Glaslyn river's course through the estuary, thus creating an enclosed harbour at Borth-y-Gest.
On the same date 10 years later the NWNGR obtained its Act - if built in full, this would have created a network of two foot lines around North Wales , and would have enveloped the Croesor, creating the line we know now as the Welsh Highland, some 50 years earlier than actually happened.
Track is all hand built to 7.83mm gauge using copper clad sleepers and PECO Z gauge rail. Stock is a mixture of scratchbuilt and kitbuilt items, running on 2mm Association wheels set to 6.9mm back-to-back. The layout runs with DCC control by Lenz, decoders by Lenz and also now with Umelec and Dietz sound decoders - LISTEN to the England engines at work on the wharf..and see the world's first (I think) Double Fairlie ( James Spooner) in 4mm scale with DCC lights, sound and smoke .
BRONABER SIDINGS
A 5.5mm scale layout by Mike Chinery
Scale 5.5mm/1ft
Gauge 12mm
Size 6' x 1.5
This small layout has been produced in order to show what is possible in this scale. The rolling stock, track, figures and road vehicles are all commercially available. The scale itself is unusual but has been around for a long time. It was introduced by GEM in the early 1960's and was used to produce the first commercial range of narrow gauge models. It had great potential but lost out to the introduction of mass produced HOe scale (3.5mm scale on 9mm gauge track) models from the continent.
In the late 1980's an Association was formed to support the scale, and in 1996 Malcolm Savage bought the original range from GEM. Many of the old models have been improved, and reintroduced, and new models have been produced. Other manufacturers have started making their products available in this scale, something that never happened the first time around.
See the Association website www.55news.org
BURGERDORF
A Hoe layout by Graham R Hand
Scale 3.5mm/1ft
Gauge 9mm
Size 6' x 1'
Burgerdorf represents an imaginary narrow gauge line in the Austrian Tyrol, which is portrayed as it would have been in the early 1970's.
At this time some general goods and parcel traffic would have remained, supplemented by considerable timber loadings, to and from the sawmills. These, and regular passenger services, were diesel hauled. One or two steam locomotives were, however, retained to operate increasingly popular tourist trains. Originally planned and built over twenty years ago, the layout has been completely rebuilt recently, whilst re-using much of the original equipment, rolling stock and buildings.
Questions are very welcome - we might even know the answers!
CRANLEY LAKE RAILROAD
An On30 layout by Derek Naylor
Scale 7mm/1ft
Gauge 16.5mm
Size 10' x 4'
The layout follows a favourite theme of the builder, that of a tourist line running to a lake, combined with the usual general freight, and some kind of mineral. For an American line, the site is very cramped, even for a narrow gauge line.
Locomotives are mainly Bachmann On30. One loco, the diesel, is a Bachmann 00 kit bashed into a rod drive chassis, and larger cab. The Heisler is in its third guise. It started out as an Avonside loco, then the chassis was used for a fun layout, finally by just adding a bell and spark arresting chimney, it has become "Americanised".
Buildings are all scratch built, mainly from balsa wood and card. At the time of writing this the hopper complex is incomplete, but should be an operating model at the exhibition.
DINAS DDU (N.W.N.G.RYS)
A Layout by Peter Booth
Scale 8mm/1ft (1:38)
Gauge 16mm
Size 16.5' x 2.5'
Dinas Ddu is closely based upon the approach to Dinas Junction station, which was the northern terminus for the North Wales Narrow Gauge Railways company's main line to Rhyd Ddu ( South Snowdon in later years). It is modeled as it is thought to have been in the early part of the 20 th century, based upon contemporary plans and photographs. This railway was eventually incorporated into the ill-fated Welsh Highland Railway in 1922, and the site is now part of the new expanding Welsh Highland Railway. Eventually it is hoped that the whole of this spectacularly scenic railway will be re-opened from Caernarfon to Porthmadog.
The intention has always been to model virtually everything from scratch, and this has largely been accomplished, the choice of the unusual scale of 8mm/1ft leaving little option. The track is spiked to wooden sleepers in the prototypical manner, and the ballast has been produced from crushed slate. The locomotives have been constructed from nickel silver and brass, information having been obtained, where possible, from the manufacturers' original drawings.
Coaches and wagons are constructed from wood, nickel silver or plasticard, on nickel silver and brass underframes. Additional stock is planned, a Cleminson six wheel coal wagon has recently joined the fleet, and some more large coal wagons are on the way.
Stonework on the buildings has been produced by building up layers of Polyfilla onto a scribed plaster base, the resulting textured finish being painted with watercolours. The corrugated iron was obtained from Slater's sheet, which works exactly right for the chosen scale. Grass is made from individual clumps of plumbers' hemp. Bushes and other scenery are made from a variety of materials.
The model was first started in the mid 1980'2 and is now virtually complete, although there is scope for further scenic development. The layout will eventually be extended to include most of the narrow gauge station at Dinas, although it will not be practical to include the large sidings complex.
The owner has been a member of the 7mm Narrow Gauge Association for many years and has found inspiration and enjoyment from being associated with this excellent body. Membership is recommended for anyone modelling the narrower gauges in the larger scales.
DONEGAL
An OOn3 layout by Dr G Alan Gee
Scale 4mm/1ft
Gauge 12mm
Size 20' x 2.25'
In the 1950's the County Donegal Railway Joint Committee, equally owned by the Great Northern Railway of Ireland, and the London Midland and Scottish Railway of England, operated the largest 3' gauge railway system in the British Isles . The mainline ran from Londonderry to Strabane, with a branch to Letterkenny, then on to Stranorlar, Donegal, and terminating at the fishing port of Killybegs. From Donegal the line also branched to the seaside town of Ballyshannon . The total track mileage was 124 miles. By the 1950's the County Donegal Railway had introduced diesel railcars for all its scheduled passenger services. Steam locomotives were still used for goods traffic, and the famous Donegal excursion trains. During exhibitions we try to show the typical timetable workings at Donegal for a Bank Holiday Monday in August 1950. Allowing for space restrictions, the railway is an exact model of Donegal station as it was in the 1950's. All the buildings have been reproduced from photographs taken at the time, or from measurements of the buildings that remain today. The track layouts, and the rolling stock, are also correct for this period. Modified Faller road vehicles have also been incorporated into the layout, to illustrate the integrated bus and train transport system pioneered in Ireland by the County Donegal Railway.
The operators will be pleased to answer any questions you have about the layout, and also the County Donegal Railway Heritage Centre located at Donegal station in Ireland .
This layout was featured in the September and October 2006 issues of Railway Modeller.
Photos Steve Flint, courtesy of Railway Modeller
LLANFAIRISH & ABER
A 009 layout by Andy Cundick
Scale 4mm/1ft
Gauge 9mm
Size 16' x 5'
Llanfairish as originally built, was merely a test track for my 009 stock. However since then it seems to have developed a life of its own. Llanfairish is based on Llanfair Caereinion on the 2'6" gauge Welshpool and Llanfair Railway in mid Wales . It is modeled as it was during its goods only phase in the 1940/1950's. Aber is based on Abergynolwyn, the upper passenger terminus of the 2'3" gauge Tallylyn Railway, as it was in the 1930's, before it became the pioneer preservation line in 1951.
Questions on these lines, narrow gauge in general, and 009 modelling, are encouraged.
MOUNT DOWD 2
A narrow gauge live steam layout, built and operated by members of the Yorkshire Group of the 16mm Narrow Gauge Modellers
Scale 16mm/foot
Size 32' x 15'
PEN-Y-FFORDD
An O16.5 layout by the Heywood Model Railway Group
Scale 7mm/1ft
Gauge 16.5mm
Size 16' x 8'
Pen-y-ffordd is a 7mm narrow gauge layout, running on 16.5mm track. The layout is not based on any particular prototype, but was built to give the flavour of the Welsh narrow gauge. The locomotives and rolling stock are either kit or scratch built, representing a number of narrow gauge prototypes, mainly the Ffestiniog, Talyllyn, Welsh Highland, and the long lost Glyn Valley Tramway. All the stock is fitted with Kadee couplings. Automatic uncoupling is effected by strategically placed magnets located under the track. Track work is PECO O16.5mm. The buildings are scratch built, using foam board, and Slaters Plastikard of various types. The layout has been built by three members of Heywood Model Railway Group, and has taken two years to build.
If you have any questions about the layout, please ask one of the operators.
REDWOOD LUMBER COMPANY
An On30 layout by Roger Nicholls
Scale 7mm/1ft
Gauge 16.5mm
Size 10' x 2'
Situated in North West California during the 1950's, Redwood Lumber Company portrays a small narrow gauge logging and lumber line, of which there were several during this time. Locomotives and rolling stock were sometimes purchased from other companies, hence the various road names. The line interchanges cars with another narrow gauge railroad, the South Pacific Coast .
The locomotives are Shay, and Climax, which along with the rolling stock, are products of Bachmann. The engine house, sawmill and water tower are scratch built from balsa strip.
Scenic materials are from Woodland Scenics, ballast is sand, trees are shaded and stained balsa trunks, and the foliage is conifer green. The back scene is hand painted using emulsion for the sky, Humbrol matt paints for distant trees and mountains, and pastel chalks for the clouds.
This is a DCC FREE ZONE, conventional being spoken here, albeit very slowly, as we are from Yorkshire .
Any questions do not be afraid to ask.
This layout is due to appear in the March 2007 Continental Modeller.
TAN YR ALLT & DWFFYR UCHAF
A 009 LAYOUT BY Roger Christian and Stan Williams
Scale 4mm/1ft
Gauge 9mm
Size 16' x 2'
"Tan yr Allt" is based on Tan-y-Bwlch station on the famous Ffestiniog narrow gauge railway in North Wales . The real station is set on a hillside along which the line meanders. Much modellers licence has had to be used to reduce the length into a model that is manageable. "Dwffyr Uchaf" also forms part of another layout as well as providing a terminus, thus widening the operating potential on the layout. The buildings are representative, but the main station house is close model of how it was before extension. Most of the buildings are constructed using the Wills materials pack, track is PECO 009, and some 'N' gauge, while the rock faces are either broken cork bark or plaster castings.A fair cross section of Ffestiniog locomotives, and rolling stock, are run on the layout. We also run stock from other Welsh narrow gauge railways, and from further afield, for variety, depending on which operators are present with their own personal interests.
The operators are all members of the 009 SOCIETY, which is the largest society in the world catering for narrow gauge modellers. We will be happy to answer any questions regarding the society, the layout, scenic's and models. In return we ask that you enjoy watching the trains go by and, if present, control your children and prevent any finger poking. Most of the models are made by the operators, and it only takes a second to destroy many hours work.
THE STEINTALBAHN X – OBERSDORF OST
An HO/Hoe layout by Graham Lightfoot
Scale 3.5mm/1 ft
Gauge 16.5mm/9mm
Size 5' x 4'
The Steintalbahn X has been specially constructed to commemorate the 25 th anniversary of the German Railway Society in 2006. Like all my previous HO/Hoe layouts, no X is a fictitious local government owned 750mm gauge line in Bavaria , which shares running rights over most of its track with the state owned DRG.
Obersdorf Ost is a small Bahnhof on a section of dual gauge track in the Stoltal Valley , on the line from Guntersberge to Augustdorf. The Steintalbahn (STB) also operates a short branch line from Obersdorf Ost to Thorndorf, and serves a mine close to the Bahnhof, using standard gauge wagons on transporter wagons.
The DRG declined the offer to have a siding, or goods facilities, at Obersdorf Ost, as it did not consider that traffic in the area would generate sufficient income. But the STB handle small consignments of everyday, and express delivery items on behalf of the DRG, in the goods shed adjacent to the main Bahnhof building.
The layout uses a mixture of DRG and STB narrow gauge, and DRG standard gauge stock, all from my permanent layout (STB IX). On occasions the odd Bavarian train can be seen on specials, put on by the DRG to celebrate various local events in the towns and villages in the Stoltal valley. An original EGGERBAHN, No 1, 0-4-0 diesel operates on the feldbahn section in the mine area.
Steintalbahn X - Obersdorf Ost, featured in the September 2006 edition of Continental Modeller, and a short video clip appeared in the PECO 2006 CD.
TIMPDON LAKE RAILWAY
An SM32 layout by Chris MacKenzie
Scale 16mm/1ft
Gauge 32mm
Size 15.5' x 9'
16mm scale on 32mm gauge track (2 foot narrow gauge) has become very popular in recent years mainly because of the large number of articles published in model railway magazines. These all illustrate live steam engines running through all sizes of garden.This layout tries to show that 16mm modelling can also be taken indoors. Although most people don't want to run live steam engines in their spare bedroom, a workable layout is still possible in a garage, shed or cellar. Both Mamod and Peco make 2' 6" radius set-track and as you can see, these tight curves can look quite prototypical with short rolling stock. The layout on show here today depicts a scene at the Timpdon Lake Railway's engine sheds and Harbour Station. It's an Open Day, so all the loco's are on show.
Look out for the working scenic dioramas (like camera flashing train-spotters, working Aldis lamps giving morse code messages, working swing rain bridge, not to mention a welding repairman, a smoking barbecue and many more!) There's a CCTV system giving various vantage points, and even a camera in the train giving a passenger's perspective.
After careful consideration it was decided to build the layout on a freelance design. In such limited space it would be impossible to show so much traffic and detail (don't forget an average Ffestiniog train is over 16 feet long in this scale!). Instead, an attempt was made to recreate the atmosphere of several popular narrow gauge lines. However the operators argue that this isn't a "model" railway - it's a real one in its own right!
16mm scale narrow gauge is for everyone - not just the rich. Of course it's possible to buy a ready-to-run steam loco for over a thousand pounds, but it's also possible to make yourself a small battery operated loco for under five pounds - and that includes the batteries!
The operators of the layout all have their own garden line and so will only be too glad to answer questions and offer advice.
You can also ask for a leaflet on the 16mm Narrow Gauge Modellers' Association. Membership not only puts you in touch with fellow minded railway buffs at various national events, it also provides valuable information to get you started.
Many members in the Lancashire And District Section (LADS) visit other members' railways most Sunday afternoons throughout the summer, and every month during the winter. They will also gladly assist anyone considering starting their own railway.
Again, ask for details!
TROLLENBERG JUNCTION
A G scale layout by Yorkshire Dales G Scale Society
Scale G
Gauge 45mm
Size 20' x 17'
Commenced in February 2005, the layout is currently based upon an area of 20' x 17'. A high level branch is under development at our Keighley clubrooms.
The layout currently has three running tracks, one of which is operated under Digital Command Control, (DCC). This allows us to use and demonstrate both analogue and digital systems.
We operate both European and American stock on narrow gauge track, representing a metre wide track. However G scale is a broad church when it comes to scales - if it looks right, it is usually accepted as okay.
Locomotives can be electric or battery powered - radio control is available. Steam powered locomotives are often used outdoors - track can be quickly together for use on the patio etc. for the day, or a more permanent garden design can be developed.
A common misunderstanding is that this scale is expensive - however a basic starter set can be purchased for around £170 or less.
Please ask if you have any questions. This G scale group was started in April 2004, and presently has members across the North of England.
If you are interested in taking things further, you are welcome to visit us at the Keighley club - just ask for details.
TTARRAG SHED
A narrow gauge layout, featuring live steam Garratt's (including NG16 and K1 as operated by the Welsh Highland Railway, Caernarfon), built and operated by members of the 16mm Garratt Owners & Operators Association.
Scale 16mm/foot
Size 30' x 10'
Ttarrag Shed is operated by the 16mm Garratt Owners & Operators Association which was formed 5 years ago to bring together all those with an interest in 16mm scale Beyer-Garratt type locomotives.
The layout itself depicts a locomotive shed & is complete with all the items that you expect to find in an area where Garratt locomotives are serviced & stabled.
You'll find a loco shed, ashpits, coal tower, works department, watering facilities - all items required to keep the Garratts running.
The majority of the Garratts on Ttarrag Shed are live steam & either coal or gas fired. A Festiniog/NWNGR layout by Paul Holmes
Gauge 7.83mm
In 1865 the Croesor Tramway obtained an Act of Parliament permitting the construction of an extension of their line around the coast from the quays at Portmadoc to the village of Borth-y-Gest , and to run steam locomotives on their 2 foot line.
The line was never constructed, but my model is yet another 'might have been'. I assume that the line came around the headland and behind the fictional Gorseddau slate warehouse to emerge onto a newly built wharf that had been constructed parallel to the Glaslyn river's course through the estuary, thus creating an enclosed harbour at Borth-y-Gest.
On the same date 10 years later the NWNGR obtained its Act - if built in full, this would have created a network of two foot lines around North Wales , and would have enveloped the Croesor, creating the line we know now as the Welsh Highland, some 50 years earlier than actually happened.
Track is all hand built to 7.83mm gauge using copper clad sleepers and PECO Z gauge rail. Stock is a mixture of scratchbuilt and kitbuilt items, running on 2mm Association wheels set to 6.9mm back-to-back. The layout runs with DCC control by Lenz, decoders by Lenz and also now with Umelec and Dietz sound decoders - LISTEN to the England engines at work on the wharf..and see the world's first (I think) Double Fairlie ( James Spooner) in 4mm scale with DCC lights, sound and smoke .
View the embedded image gallery online at:
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProIdcc85566d25
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProIdcc85566d25
BRONABER SIDINGS
A 5.5mm scale layout by Mike Chinery
Scale 5.5mm/1ft
Gauge 12mm
Size 6' x 1.5
This small layout has been produced in order to show what is possible in this scale. The rolling stock, track, figures and road vehicles are all commercially available. The scale itself is unusual but has been around for a long time. It was introduced by GEM in the early 1960's and was used to produce the first commercial range of narrow gauge models. It had great potential but lost out to the introduction of mass produced HOe scale (3.5mm scale on 9mm gauge track) models from the continent.
In the late 1980's an Association was formed to support the scale, and in 1996 Malcolm Savage bought the original range from GEM. Many of the old models have been improved, and reintroduced, and new models have been produced. Other manufacturers have started making their products available in this scale, something that never happened the first time around.
See the Association website www.55news.org
BURGERDORF
A Hoe layout by Graham R Hand
Scale 3.5mm/1ft
Gauge 9mm
Size 6' x 1'
Burgerdorf represents an imaginary narrow gauge line in the Austrian Tyrol, which is portrayed as it would have been in the early 1970's.
At this time some general goods and parcel traffic would have remained, supplemented by considerable timber loadings, to and from the sawmills. These, and regular passenger services, were diesel hauled. One or two steam locomotives were, however, retained to operate increasingly popular tourist trains. Originally planned and built over twenty years ago, the layout has been completely rebuilt recently, whilst re-using much of the original equipment, rolling stock and buildings.
Questions are very welcome - we might even know the answers!
View the embedded image gallery online at:
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProId6dee017dc1
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProId6dee017dc1
CRANLEY LAKE RAILROAD
An On30 layout by Derek Naylor
Scale 7mm/1ft
Gauge 16.5mm
Size 10' x 4'
The layout follows a favourite theme of the builder, that of a tourist line running to a lake, combined with the usual general freight, and some kind of mineral. For an American line, the site is very cramped, even for a narrow gauge line.
Locomotives are mainly Bachmann On30. One loco, the diesel, is a Bachmann 00 kit bashed into a rod drive chassis, and larger cab. The Heisler is in its third guise. It started out as an Avonside loco, then the chassis was used for a fun layout, finally by just adding a bell and spark arresting chimney, it has become "Americanised".
Buildings are all scratch built, mainly from balsa wood and card. At the time of writing this the hopper complex is incomplete, but should be an operating model at the exhibition.
View the embedded image gallery online at:
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProIde484212de8
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProIde484212de8
DINAS DDU (N.W.N.G.RYS)
A Layout by Peter Booth
Scale 8mm/1ft (1:38)
Gauge 16mm
Size 16.5' x 2.5'
Dinas Ddu is closely based upon the approach to Dinas Junction station, which was the northern terminus for the North Wales Narrow Gauge Railways company's main line to Rhyd Ddu ( South Snowdon in later years). It is modeled as it is thought to have been in the early part of the 20 th century, based upon contemporary plans and photographs. This railway was eventually incorporated into the ill-fated Welsh Highland Railway in 1922, and the site is now part of the new expanding Welsh Highland Railway. Eventually it is hoped that the whole of this spectacularly scenic railway will be re-opened from Caernarfon to Porthmadog.
The intention has always been to model virtually everything from scratch, and this has largely been accomplished, the choice of the unusual scale of 8mm/1ft leaving little option. The track is spiked to wooden sleepers in the prototypical manner, and the ballast has been produced from crushed slate. The locomotives have been constructed from nickel silver and brass, information having been obtained, where possible, from the manufacturers' original drawings.
Coaches and wagons are constructed from wood, nickel silver or plasticard, on nickel silver and brass underframes. Additional stock is planned, a Cleminson six wheel coal wagon has recently joined the fleet, and some more large coal wagons are on the way.
Stonework on the buildings has been produced by building up layers of Polyfilla onto a scribed plaster base, the resulting textured finish being painted with watercolours. The corrugated iron was obtained from Slater's sheet, which works exactly right for the chosen scale. Grass is made from individual clumps of plumbers' hemp. Bushes and other scenery are made from a variety of materials.
The model was first started in the mid 1980'2 and is now virtually complete, although there is scope for further scenic development. The layout will eventually be extended to include most of the narrow gauge station at Dinas, although it will not be practical to include the large sidings complex.
The owner has been a member of the 7mm Narrow Gauge Association for many years and has found inspiration and enjoyment from being associated with this excellent body. Membership is recommended for anyone modelling the narrower gauges in the larger scales.
View the embedded image gallery online at:
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProId61751f3298
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProId61751f3298
DONEGAL
An OOn3 layout by Dr G Alan Gee
Scale 4mm/1ft
Gauge 12mm
Size 20' x 2.25'
In the 1950's the County Donegal Railway Joint Committee, equally owned by the Great Northern Railway of Ireland, and the London Midland and Scottish Railway of England, operated the largest 3' gauge railway system in the British Isles . The mainline ran from Londonderry to Strabane, with a branch to Letterkenny, then on to Stranorlar, Donegal, and terminating at the fishing port of Killybegs. From Donegal the line also branched to the seaside town of Ballyshannon . The total track mileage was 124 miles. By the 1950's the County Donegal Railway had introduced diesel railcars for all its scheduled passenger services. Steam locomotives were still used for goods traffic, and the famous Donegal excursion trains. During exhibitions we try to show the typical timetable workings at Donegal for a Bank Holiday Monday in August 1950. Allowing for space restrictions, the railway is an exact model of Donegal station as it was in the 1950's. All the buildings have been reproduced from photographs taken at the time, or from measurements of the buildings that remain today. The track layouts, and the rolling stock, are also correct for this period. Modified Faller road vehicles have also been incorporated into the layout, to illustrate the integrated bus and train transport system pioneered in Ireland by the County Donegal Railway.
The operators will be pleased to answer any questions you have about the layout, and also the County Donegal Railway Heritage Centre located at Donegal station in Ireland .
This layout was featured in the September and October 2006 issues of Railway Modeller.
Photos Steve Flint, courtesy of Railway Modeller
View the embedded image gallery online at:
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProId30e5d57604
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProId30e5d57604
LLANFAIRISH & ABER
A 009 layout by Andy Cundick
Scale 4mm/1ft
Gauge 9mm
Size 16' x 5'
Llanfairish as originally built, was merely a test track for my 009 stock. However since then it seems to have developed a life of its own. Llanfairish is based on Llanfair Caereinion on the 2'6" gauge Welshpool and Llanfair Railway in mid Wales . It is modeled as it was during its goods only phase in the 1940/1950's. Aber is based on Abergynolwyn, the upper passenger terminus of the 2'3" gauge Tallylyn Railway, as it was in the 1930's, before it became the pioneer preservation line in 1951.
Questions on these lines, narrow gauge in general, and 009 modelling, are encouraged.
View the embedded image gallery online at:
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProId7fe795b785
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProId7fe795b785
MOUNT DOWD 2
A narrow gauge live steam layout, built and operated by members of the Yorkshire Group of the 16mm Narrow Gauge Modellers
Scale 16mm/foot
Size 32' x 15'
-
Mount Dowd
Mount Dowd
-
Mount Dowd
Mount Dowd
-
Mount Dowd
Mount Dowd
-
Mount Dowd
Mount Dowd
-
Mount Dowd
Mount Dowd
-
Mount Dowd
Mount Dowd
-
Mount Dowd
Mount Dowd
-
Mount Dowd
Mount Dowd
View the embedded image gallery online at:
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProId7a4eb0fcea
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProId7a4eb0fcea
PEN-Y-FFORDD
An O16.5 layout by the Heywood Model Railway Group
Scale 7mm/1ft
Gauge 16.5mm
Size 16' x 8'
Pen-y-ffordd is a 7mm narrow gauge layout, running on 16.5mm track. The layout is not based on any particular prototype, but was built to give the flavour of the Welsh narrow gauge. The locomotives and rolling stock are either kit or scratch built, representing a number of narrow gauge prototypes, mainly the Ffestiniog, Talyllyn, Welsh Highland, and the long lost Glyn Valley Tramway. All the stock is fitted with Kadee couplings. Automatic uncoupling is effected by strategically placed magnets located under the track. Track work is PECO O16.5mm. The buildings are scratch built, using foam board, and Slaters Plastikard of various types. The layout has been built by three members of Heywood Model Railway Group, and has taken two years to build.
If you have any questions about the layout, please ask one of the operators.
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
View the embedded image gallery online at:
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProIdd55aae97c0
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProIdd55aae97c0
REDWOOD LUMBER COMPANY
An On30 layout by Roger Nicholls
Scale 7mm/1ft
Gauge 16.5mm
Size 10' x 2'
Situated in North West California during the 1950's, Redwood Lumber Company portrays a small narrow gauge logging and lumber line, of which there were several during this time. Locomotives and rolling stock were sometimes purchased from other companies, hence the various road names. The line interchanges cars with another narrow gauge railroad, the South Pacific Coast .
The locomotives are Shay, and Climax, which along with the rolling stock, are products of Bachmann. The engine house, sawmill and water tower are scratch built from balsa strip.
Scenic materials are from Woodland Scenics, ballast is sand, trees are shaded and stained balsa trunks, and the foliage is conifer green. The back scene is hand painted using emulsion for the sky, Humbrol matt paints for distant trees and mountains, and pastel chalks for the clouds.
This is a DCC FREE ZONE, conventional being spoken here, albeit very slowly, as we are from Yorkshire .
Any questions do not be afraid to ask.
This layout is due to appear in the March 2007 Continental Modeller.
TAN YR ALLT & DWFFYR UCHAF
A 009 LAYOUT BY Roger Christian and Stan Williams
Scale 4mm/1ft
Gauge 9mm
Size 16' x 2'
"Tan yr Allt" is based on Tan-y-Bwlch station on the famous Ffestiniog narrow gauge railway in North Wales . The real station is set on a hillside along which the line meanders. Much modellers licence has had to be used to reduce the length into a model that is manageable. "Dwffyr Uchaf" also forms part of another layout as well as providing a terminus, thus widening the operating potential on the layout. The buildings are representative, but the main station house is close model of how it was before extension. Most of the buildings are constructed using the Wills materials pack, track is PECO 009, and some 'N' gauge, while the rock faces are either broken cork bark or plaster castings.A fair cross section of Ffestiniog locomotives, and rolling stock, are run on the layout. We also run stock from other Welsh narrow gauge railways, and from further afield, for variety, depending on which operators are present with their own personal interests.
The operators are all members of the 009 SOCIETY, which is the largest society in the world catering for narrow gauge modellers. We will be happy to answer any questions regarding the society, the layout, scenic's and models. In return we ask that you enjoy watching the trains go by and, if present, control your children and prevent any finger poking. Most of the models are made by the operators, and it only takes a second to destroy many hours work.
-
Tan-yr-Allt
Tan-yr-Allt
-
Tan-yr-Allt
Tan-yr-Allt
-
Tan-yr-Allt
Tan-yr-Allt
-
Tan-yr-Allt
Tan-yr-Allt
-
Tan-yr-Allt
Tan-yr-Allt
View the embedded image gallery online at:
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProId12370a5731
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProId12370a5731
THE STEINTALBAHN X – OBERSDORF OST
An HO/Hoe layout by Graham Lightfoot
Scale 3.5mm/1 ft
Gauge 16.5mm/9mm
Size 5' x 4'
The Steintalbahn X has been specially constructed to commemorate the 25 th anniversary of the German Railway Society in 2006. Like all my previous HO/Hoe layouts, no X is a fictitious local government owned 750mm gauge line in Bavaria , which shares running rights over most of its track with the state owned DRG.
Obersdorf Ost is a small Bahnhof on a section of dual gauge track in the Stoltal Valley , on the line from Guntersberge to Augustdorf. The Steintalbahn (STB) also operates a short branch line from Obersdorf Ost to Thorndorf, and serves a mine close to the Bahnhof, using standard gauge wagons on transporter wagons.
The DRG declined the offer to have a siding, or goods facilities, at Obersdorf Ost, as it did not consider that traffic in the area would generate sufficient income. But the STB handle small consignments of everyday, and express delivery items on behalf of the DRG, in the goods shed adjacent to the main Bahnhof building.
The layout uses a mixture of DRG and STB narrow gauge, and DRG standard gauge stock, all from my permanent layout (STB IX). On occasions the odd Bavarian train can be seen on specials, put on by the DRG to celebrate various local events in the towns and villages in the Stoltal valley. An original EGGERBAHN, No 1, 0-4-0 diesel operates on the feldbahn section in the mine area.
Steintalbahn X - Obersdorf Ost, featured in the September 2006 edition of Continental Modeller, and a short video clip appeared in the PECO 2006 CD.
TIMPDON LAKE RAILWAY
An SM32 layout by Chris MacKenzie
Scale 16mm/1ft
Gauge 32mm
Size 15.5' x 9'
16mm scale on 32mm gauge track (2 foot narrow gauge) has become very popular in recent years mainly because of the large number of articles published in model railway magazines. These all illustrate live steam engines running through all sizes of garden.This layout tries to show that 16mm modelling can also be taken indoors. Although most people don't want to run live steam engines in their spare bedroom, a workable layout is still possible in a garage, shed or cellar. Both Mamod and Peco make 2' 6" radius set-track and as you can see, these tight curves can look quite prototypical with short rolling stock. The layout on show here today depicts a scene at the Timpdon Lake Railway's engine sheds and Harbour Station. It's an Open Day, so all the loco's are on show.
Look out for the working scenic dioramas (like camera flashing train-spotters, working Aldis lamps giving morse code messages, working swing rain bridge, not to mention a welding repairman, a smoking barbecue and many more!) There's a CCTV system giving various vantage points, and even a camera in the train giving a passenger's perspective.
After careful consideration it was decided to build the layout on a freelance design. In such limited space it would be impossible to show so much traffic and detail (don't forget an average Ffestiniog train is over 16 feet long in this scale!). Instead, an attempt was made to recreate the atmosphere of several popular narrow gauge lines. However the operators argue that this isn't a "model" railway - it's a real one in its own right!
16mm scale narrow gauge is for everyone - not just the rich. Of course it's possible to buy a ready-to-run steam loco for over a thousand pounds, but it's also possible to make yourself a small battery operated loco for under five pounds - and that includes the batteries!
The operators of the layout all have their own garden line and so will only be too glad to answer questions and offer advice.
You can also ask for a leaflet on the 16mm Narrow Gauge Modellers' Association. Membership not only puts you in touch with fellow minded railway buffs at various national events, it also provides valuable information to get you started.
Many members in the Lancashire And District Section (LADS) visit other members' railways most Sunday afternoons throughout the summer, and every month during the winter. They will also gladly assist anyone considering starting their own railway.
Again, ask for details!
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
View the embedded image gallery online at:
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProIdf8d55d7843
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProIdf8d55d7843
TROLLENBERG JUNCTION
A G scale layout by Yorkshire Dales G Scale Society
Scale G
Gauge 45mm
Size 20' x 17'
Commenced in February 2005, the layout is currently based upon an area of 20' x 17'. A high level branch is under development at our Keighley clubrooms.
The layout currently has three running tracks, one of which is operated under Digital Command Control, (DCC). This allows us to use and demonstrate both analogue and digital systems.
We operate both European and American stock on narrow gauge track, representing a metre wide track. However G scale is a broad church when it comes to scales - if it looks right, it is usually accepted as okay.
Locomotives can be electric or battery powered - radio control is available. Steam powered locomotives are often used outdoors - track can be quickly together for use on the patio etc. for the day, or a more permanent garden design can be developed.
A common misunderstanding is that this scale is expensive - however a basic starter set can be purchased for around £170 or less.
Please ask if you have any questions. This G scale group was started in April 2004, and presently has members across the North of England.
If you are interested in taking things further, you are welcome to visit us at the Keighley club - just ask for details.
View the embedded image gallery online at:
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProIdde29639ea8
https://narrowgaugenorth.kirkby-email.com/index.php/traders/93-public-news/previous-years/324-narrow-gauge-north-2007#sigProIdde29639ea8
TTARRAG SHED
A narrow gauge layout, featuring live steam Garratt's (including NG16 and K1 as operated by the Welsh Highland Railway, Caernarfon), built and operated by members of the 16mm Garratt Owners & Operators Association.
Scale 16mm/foot
Size 30' x 10'
Ttarrag Shed is operated by the 16mm Garratt Owners & Operators Association which was formed 5 years ago to bring together all those with an interest in 16mm scale Beyer-Garratt type locomotives.
The layout itself depicts a locomotive shed & is complete with all the items that you expect to find in an area where Garratt locomotives are serviced & stabled.
You'll find a loco shed, ashpits, coal tower, works department, watering facilities - all items required to keep the Garratts running.