Narrow Gauge North

2027

Exhibitors : Previous

Mount Dowd

A layout by The Association of 16mm NG Modellers – Yorkshire Area
Scale : 16mm/foot
Gauge : 32mm
Size : 28’ x 15’
The Yorkshire 16mm Group also has a website.

There are also a large number of videos available featuring Mount Dowd.

https://youtu.be/kMjcfVlCytw

Trollenberg Heights

A G scale layout by Yorkshire Dales G Scale Society
Scale G
Gauge 45mm
Size 20' x 17'

The Trollenberg Heights branch from Trollenberg Junction rises to a higher level by precariously traversing the mountains. The Trollenberg Terror is said to lurk in the depths of the mountain mist - will it appear? Entertainment is the name of the game - visitors on day trips are hopeful for a sighting of the beast. The layout has been constructed over the last year to allow easier transportation, and hopefully provide something a little bit different.

We hope you enjoy it - come and have a look. They say the Trollenberg Terror has been tamed!

Under Cover

A 009 layout by Darryl Foxwell
Scale 4mm/1ft
Gauge 9mm
Size 8" x 8"

The layout depicts the use of camouflage in war, particularly hiding things from aircraft flying over the area. The scene could be set in Southern England prior to D-Day or Germany in the final months of the Second World War. Current exhibitions are showing the German scene where, with airfields being bombed by the Allies, aircraft were hidden in the local woods, and used the autobahns to take off and land. The area is served by a narrow gauge railway running through the woods, with another section built on the autobahn. A wide variety of diesels and steam locos can be seen as well as Tiger tanks moving into defensive positions. In this heavily wooded area three sections of camouflage netting can be seen covering fighter aircraft, with a variety of soft skinned vehicles dispersed among the trees.

Avyn-a-Llyin

A 009 layout by Andy and Alison Bailey
Scale 4mm/1ft
Gauge 9mm
Size 10' x 7'

After six years  success with the fictitious layout "Llandovnodd", we decided to model the next fictitious village up the coast called Avyn-a-llyin. The layout has Welsh origins, hence the name, although you will realise the is not Welsh, if you say it the English way. The grounds of the ruined castle on the hill now belong to the local golf club, who have constructed a  very scenic golf course. The pier is of timber construction, with each upright individually screwed into place. Most of the buildings are scratch built in Linka and Plastikard. Two of the roofs  are genuine hand cut Welsh slate, and three roofs are thatched with plumbers hemp in Pendon style. The sea is literally dozens of coats on non-drip varnish on a mixture of sand and ballast. The beach is real sand from our local sand quarry, and is about 20mm deep. There  are over 200 figures on the layout, and in case you cannot find them, the nudists are at the back of the beach under the sea wall!The track is Peco crazy track with Seep electrics, and ballasted with a mix of granite, limestone and sand. Most of the stock is kit built with a few scratch built items. Avin-a-llyin was first  exhibited in October 1989, and has since won numerous trophies. It also appeared in the Railway Modeller, February 1992.

We hope you enjoy looking  at the layout, as much as we did building it.

 

Blackhawk House

An On30 layout by Ian Drummond 
Scale 7mm/1ft 
Gauge 16.5mm 
Size 10' x 6'

Blackhawk House was the Engine House (American term for engine shed) of the Gilpin Gold Tram, which served many of the mines of Gilpin County in Colorado , USA . This 2ft gauge line was constructed in several phases staring in 1887, and eventually the line was some twenty six miles long. It twisted and climbed all over Gilpin County with steep gradients, in places at least 1 in 20, and sharp curves, the tightest of which was reputed to have been 50ft radius on the main line. Sadly thought the line was relatively short lived, closing in 1917. The story of the line was related in the March/April 2006 edition of the magazine "Narrow Gauge World". The model supposes that in fact the line survived longer, being purchased by a large mining company, which brought in some additional motive power to supplement the line's original Shay geared locomotives. At the centre of the layout is Blackhawk House which was in fact a converted barn, and serves as the main engineering facility on the line. The main line climbs and curves round the Engine House on a series of wooden trestles. These were so close to the Engine House that when the line acquired larger locomotives, part of the roof of the barn had to be cut away to allow the engines to pass. To the front of the layout there is a line leading away to the warming house. In winter trains of gold ore were placed in the warming house overnight, in order to thaw out, the low temperatures often completely freezing the ore inside the hopper wagons. The line now operates a range of locomotives including Shays and Climax's, as well as a couple of early railtrucks. Operation of the layout is by a DCC system which allows for individual sound for each locomotive.

Narrow Gauge Railway Museum - Wagon & Carriage Works

An O16.5 layout by Alex Hume
Scale 7mm/1ft
Gauge 16.5mm
Size 8’ x 3’

This layout is part of the much more extensive "Yorkshire Modules" set-up. The Yorkshire group of the 7mm Narrow Gauge Association has devised a system of 3 ft by 18" modules. At the both ends of each module there is 6" of fixed track, carefully aligned so that all the modules fit together. What each member does in between the entry and exit points is their business! This does not lead to a neatly unified theme, with some bizarre juxtapositions when we have "module day", but it does make for some interesting variety! There are also corner 90o corner modules and 180o end modules. At the last count, we have the potential to put together some 60 feet of running line, but have so far not actually managed more than about 30 feet.

Two "normal" modules are presented here at Narrow Gauge North, being a totally non-prototypical museum. The word "museum" allows the running of whatever stock members bring along, plus many other anachronisms, to the annoyance of rivet-counters. At each end of the layout is a non-standard 180o end module, with various scenic features hiding the turns and fiddle yard. As the layout is designed to show what is possible in 7mm NG, four gauges are represented: a static standard gauge spur (to give a sense of scale), the main 3'4" circuit, a 15" shuttle which brings visitors from other parts of the museum, and a 10 1/4" gauge circuit for giving rides. Track is all standard Peco O/16.5, 009 and Z gauge, with Peco points.

The industrial buildings are a mixture of DAS on plywood, embossed Plasticard and Townstreet modular bits, with Port Wynnstay resin windows. Stock is whatever I have bought second hand plus whatever fellow members bring along, as building stock is not my strong point. Indeed, fellow members will tell you they are still trying to find what my strong point is!